9 Best Ford F-Series Aftermarket Bumpers of 2021

Your Ford truck is built to withstand tough conditions, but unfortunately, factory bumpers don’t always hold out.

A steel aftermarket bumper is your best bet for toughening up your truck for adventures. Apart from the stronger exterior, a bumper will accentuate your vehicle's good looks.

Choosing the right bumper for your truck can be a daunting task, especially with so many options to choose from.

To help you out, here's a rundown of the best bumper options for your Ford F-series trucks.

Table of Contents

HammerHead X-Series Full Brushguard Eco-Boost for Ford F-150
LEX Off-Road 2015+ Ford F-150 Generation 2 Front Bumper
American Built Heavy Duty Pipe Front Bumper Ford F-450/F-550 2011-2016
Pre-Runner Winch Front Bumper by HammerHead
Ranch Hand Legend Bullnose Front Bumper F-250/F-550 2008–2010
HammerHead Flush Mount Rear Bumper Ford F-250/F-450 1999–2016
Ranch Hand Legend Rear Bumper Ford Super Duty F-250/F-350/F-450 2017–2021
American Built Heavy Duty Pipe Rear Bumper Ford F-250/F-350 2017–2021
LEX Off-Road Raptor Baja Brute Rear Bumper Ford F-150 2010–2014
Frequently Asked Questions

Are Aftermarket Steel Bumpers Worth It?
Does It Make a Difference if the Bumper Is Made in the USA?
Are Bumpers Mandatory?

Choosing the Best Bumper for Your Ford F-Series

HammerHead X-Series Full Brushguard Eco-Boost for Ford F-150

HammerHead 600-56-0343 X-Series Full Brushguard Winch Front Bumper Ford F150 2009-2014

The HammerHead X-Series Bumper is a sturdy option with just the right mix of bells and whistles to bring a touch of sophistication to your truck. It's perfect for both off and on-road driving, providing end-to-end protection for the front of your vehicle.

Main features:

• It can fit four off-road fog cube lights for more precise night driving
• It’s winch compatible (can work with VR 10000, M8000, XD9000, VR8000)
• It’s strong but lightweight 
• Reinforced steel to provide extra strength
• Stylish diamond powder black 2-stage coat finish
• 0.750-inch shackle mounts that extend through the steel plate on the interior and exterior
• 1.75 X 0.120 inch wall tubing
• Air vent to maintain consistent airflow to your trucks radiator and intercooler (not designed to work with adaptive cruise control)
• Fits 3.25 X 3.25-inch fog lights 
• 3/16 inch plate steel 

“Last night, I was driving back to south Texas when a driver pulled out in front of me while doing 65 mph. I stomped on the brakes and hit him at about 45 – 50. The Hammerhead bumper took 95% of the impact and left me untouched.”
Will Ulmen. Verified ★★★★★ HammerHead Reviewer 

LEX Off-Road 2015+ Ford F-150 Generation 2 Front Bumper

LEX Off Road F150G2FRB 2015+ Ford F150 Gen 2 Front bumper

The LEX Off-Road Gen 2 Bumper has the menacing Baja design that will transform your truck into a beast worthy of your off-road adventures. It’s made of high-quality reinforced steel with a unique mesh design that provides extra strength while blending seamlessly into your truck.

The bumper carries a universal light mount that can accommodate any lighting requirements to keep you going long after sundown. Any of the following lights will fit this bumper:

• Fog lights
• Driving lights 
• Light Bars
• Spotlights  

The class-leading technology and materials used in the design of this bumper make it durable yet affordable. Overall, it’s excellent value for the money.

Main features:

• Beautiful satin powder black coating 
• Easy to install 
• High clearance for off-road use
• Boxed-frame with horn shape for extra strength 
• Plate pieces cut on CNC table for a precision bolt-on fit, no need for welding

American Built Heavy Duty Pipe Front Bumper Ford F-450/F-550 2011-2016

American Built Heavy Duty Pipe Front Bumper Ford F450 F550 2011-2016

With a one-piece welded design, the Heavy Duty Bumper from American Built is incredibly long-lasting. A punched-plate grille insert lets you maintain your factory fog lights and tow hooks—the entire part bolts directly onto your frame, so no welding is necessary.

An electrically applied e-coat means this bumper will never give in to rust and corrosion.

Main features:

• Easy no-drill installation
• You can keep using your factory tow hooks and fog lights
• Corrosion-resistant powder coat finish
• 14 gauge diamond plate steel skin
• 16 gauge steel center screen
• 1/4 inch steel adjustable frame mounting brackets
• 1-inch schedule 40 (1 5/16 inch OD) steel pipe wings
• Factory tow hooks which attach to 14 inch thick brackets
• Winch capable (you can add a WP022 winch plate)
• Comes with installation instructions and mounting brackets

Pre-Runner Winch Front Bumper by HammerHead

HammerHead 600-56-0061 Pre-Runner Winch Front Bumper Ford F150 2009-2014

The Pre-Runner Front Winch Bumper combines sophistication and functionality. The bumper is compatible with the following winch types:

• VR8000
• VR10000
• M8000
• XD9000i
• XD9000

It’s reinforced for extra strength to withstand all conditions, but it’s still lightweight and easy to mount.

Main features:

• A pre-runner bar that accommodates extra lights 
• Can take four off-road fog cube lights
• Welded shackle mounts on the frame’s mounting surface for added strength
• Brushguard (pre-runner style) with 1.75 X 0.120 inch wall tubing
• Front receiver hitch can replace the winch

“Best Experience - Great service, great product. Thank you”
Bill H. Verified ★★★★★ Ford Driver and Royal Truck Accessories Reviewer

Ranch Hand Legend Bullnose Front Bumper F-250/F-550 2008–2010

Ranch Hand BTF081BLR Legend Bullnose Front Bumper 2008-2010 Ford Super Duty F250-F550

The Ranch Hand Legend combines elegant simplicity with the strength of a workhouse. This unyielding heavy-duty bumper is perfect for on and off-road use.

It’s one of the toughest aftermarket workhorse bumpers available. The bumper provides full wrap-around protection with:

• A diamond plate steel body 
• 4-inch schedule 40 pipe tubing 
• Punch plate and grill guard/ bullnose
• A skirt to protect the underside of your car.

Main features 

• Custom-fit to match your rigs factory specs
• 2-inch receiver
• Tow hooks
• Fog lights 
• Powder coat finish for corrosion resistance 
• Easy bolt-on installation (comes with mounting kit and instructions)
• One-piece welded design, no rattling or moving parts for maximum protection without vibrations

HammerHead Flush Mount Rear Bumper Ford F-250/F-450 1999–2016

HammerHead 600-56-0476 Rear Bumper Ford F250-450 Flush Mount with Sensors 1999-2016

The Flush Mount Rear Bumper makes a strong rearguard for your truck. It’s lightweight and reinforced with a 1/4 inch steel plate to provide maximum protection.

Main features

• Includes reverse lights, tag lights, and steps
• Shackle mounts welded on the interior and exterior of the bumper 
• Can accommodate flush mount LED lights
• Stylish black powder coating (2 stage coat for extra corrosion prevention)

Ranch Hand Legend Rear Bumper Ford Super Duty F-250/F-350/F-450 2017–2021

Ranch Hand BBF171BLSS Legend Rear Bumper 2017-2021 Ford F250/F350/F450 Super Duty

The Ranch Hand Rear Bumper offers maximum protection with ranch-style looks, making it the perfect rear protector for your truck. It comes with 500–1000 lbs of tongue weight with 5000–10 000 lbs of towing capacity.

Main features:

• It comes with a 10-inch skirt, 1000 tongues, and 1/10 inch steel plate 
• Retains full use of rear parking sensors
• Keeps original factory receiver 
• Can accommodate sensors 
• Optional bolt-on receiver hitch 
• LED light compatible so you can work well after the sun goes down

Note: The Ranch Hand Legend Bumper does not support tow hooks, winches or cameras.

American Built Heavy Duty Pipe Rear Bumper Ford F-250/F-350 2017–2021

American Built Heavy Duty Pipe Rear Bumper Ford F250 F350 2017-2021

The Heavy Duty Pipe Rear Bumper by American Built is the perfect option for traditional-looking simplicity coupled with maximum stability.

It’s built from a 4-inch schedule 20 steel pipe with no moving parts and a 14 gauge steel plate (diamond) for extra strength.

Main features:

• Sleek corrosion resistant powder coat finish
• Accommodates two rear backup lights
• Compatible with a backup sensor 
• Comes with two tag lights 
• You can use any ball mount on the factory receiver hitch
• 1/4 inch steel frame (adjustable) mounting brackets
• Simple installation (no drilling required)

LEX Off-Road Raptor Baja Brute Rear Bumper Ford F-150 2010–2014

LEX Off Road FRBBR 2010-2014 Ford F150/Raptor Baja Brute Rear bumper

The Baja Brute Rear Bumper is an easy installation piece to give your vehicle’s rear a handsome Baja look with the maximum protection of a 0.120-inch wall of tubular steel.

It’s designed for off-road and desert use in a cool powder black satin finish.

Main features:

• High corrosion resistance 
• High clearance giving a better approach angle than the OEM bumper to protect your rear
• Welded steel tubes with robust plate sections 
• Built to order for custom fitment 
• Lightweight 

Frequently Asked Questions 

Are Aftermarket Steel Bumpers Worth It? 

Yes, aftermarket steel front and rear bumpers are worth every penny. They provide an effective way to protect your truck from damage caused by accidents or rough terrains.

They’ll save you from the considerable cost of replacing several car parts. In addition, aftermarket bumpers are designed with extra strength in mind for work and adventure.

Does It Make a Difference if the Bumper Is Made in the USA? 

Yes, USA manufactured bumpers follow a rigorous process to ensure the steel is of the highest quality. Be sure only to buy the best brands made in the USA.

Are Bumpers Mandatory?

Laws in most states require that all trucks have bumpers to keep all road users protected.

Choosing the Best Bumper for Your Ford F-Series

An aftermarket bumper is only as good as its strength and quality; anything less won’t offer you the protection you need. In addition, you want a bumper that adds to the aesthetic appeal of your Ford truck.

So, head on over to Royal Truck Accessories. You’ll find a host of Ford F-Series compatible front and rear bumpers that’ll tick all the right boxes. 

“Lots of options - Lots to choose from, but found the bumper that will work best on my truck.”
Ellis L. Verified ★★★★★ Royal Truck Accessories Reviewer